Chip-off, or chip-level, recovery means reading the memory chips of a pen drive, memory card or SSD directly when its controller or board no longer works. It is a specialist step, used when the device is not detected and normal methods cannot reach the data.

Key takeaways

  • The memory chips usually still hold the data even when the drive no longer works.
  • Chip-level work is used for dead pen drives, broken cards and SSDs with a failed controller or damaged board.
  • It is delicate and skilled: the data is scrambled and spread across chips and must be reassembled.
  • It is not a first step. A lab tests the simpler options first.
  • We offer chip-level reading for SSDs and cards at our Porur lab.

In this guide

  1. What the controller does
  2. When chip-level work is needed
  3. How it works
  4. What can make it harder or impossible
  5. What not to try yourself
  6. Cost and time
  7. What to note before you contact a lab
  8. How to prevent it next time
  9. Frequently asked questions

Written by the Recovea lab team, Porur, Chennai. Last reviewed 18 November 2026.

What the controller does

Flash drives and cards have two main parts: the memory chips that hold the data, and a controller that decides where each piece of data is stored, spreads wear across the chips and corrects errors. When you save a file, the controller scrambles and interleaves it across the memory. If the controller or board fails, the computer can no longer ask for your files, but the chips still contain them.

When chip-level work is needed

  • The pen drive or card is not detected, or shows 0 bytes, and repair tools fail.
  • The connector or board is broken, burnt or snapped off.
  • An SSD has a failed controller that the normal tools cannot revive.
  • The device was dropped, bent or damaged by water.

Before chip-level reading, a lab checks simpler possibilities: a loose contact, a firmware fault that can be handled with specialised tools, or a damaged connector that can be repaired.

When chip-level recovery is needed

Situation, why it is needed and what it involves

SituationPen drive with a broken connector
Why chip-levelThe controller cannot be reached
What it involvesMemory chip read directly.
SituationDead controller, not detected
Why chip-levelThe controller has failed
What it involvesChip image and rebuild.
SituationBurnt or water-damaged board
Why chip-levelThe board cannot power up
What it involvesChip moved to a reader.
SituationSSD with a failed controller
Why chip-levelNo controller, no access
What it involvesChip images and data rebuild.

stop   careful   safe

When chip-level recovery is needed.

How it works

  1. The engineer records the device and removes or exposes the memory chips with controlled heat and fine tools.
  2. Each chip is read with a dedicated reader, producing a raw image.
  3. The images are combined, and the controller’s scrambling, error-correction and interleaving patterns are worked out.
  4. The data is reassembled into the original layout, and the file system is read.
  5. Files are verified and delivered on a clean drive.

This is why the work needs experience, and why some modern drives are harder than others.

How chip-level recovery works
Read the chips, rebuild the data.

What can make it harder or impossible

  • Chips that are cracked, burnt or corroded.
  • Hardware encryption tied to the controller.
  • Very new controllers with little known about their scrambling.
  • Drives that were erased by TRIM or secure-erase.

Not every case succeeds, which is why we diagnose first and you only pay when we recover your data.

Ask our experts: free diagnosis. Send us a message on WhatsApp and we reply within 30 minutes during working hours (Monday to Saturday, 10:30 to 20:00). Recovery starts from ₹990, physical and complex cases are quoted individually after diagnosis, and if we cannot recover your data, you do not pay.

Chat on WhatsApp  |  Call +91 79046 79817  |  Ask D, free diagnosis

What not to try yourself

  • Do not open a pen drive and re-solder or heat the chips.
  • Do not buy a cheap controller board to swap.
  • Do not keep plugging in a drive that is hot or smells burnt.
  • Do not format or repair when the drive reappears briefly.

A failed attempt with a hot-air gun can destroy the chips and with them any chance of recovery.

Can the chips be read?

Follow the arrows and stop at the first YES

1

Is the memory chip intact, not cracked?

If no, go to the next question

If yes

It can be read directly.

2

Is the data scrambled by the controller?

If no, go to the next question

If yes

The lab works out the scrambling and page order.

3

Are there several chips?

If no, go to the next question

If yes

Each chip is read, then the data is rebuilt.

If all are no

Chip cracked: chances are very limited.

Not sure?Ask our experts on WhatsApp +91 79046 79817

What decides whether a chip can be read.

Cost and time

Diagnosis is free. Chip-level cases take longer than logical ones and are quoted individually after diagnosis, depending on the device, the number of chips and how much work is needed. We accept devices by pickup or courier from anywhere in India. If we cannot recover your data, you do not pay. Read the cost guide.

What to note before you contact a lab

Tell the engineer the brand, model and capacity, what device it was used in (camera, phone, laptop, drone), and what happened just before the problem: a removal during writing, a format prompt, a power cut. Note if the device is encrypted. Stop using the storage at once, because every write can overwrite what you want back. Keep memory cards and pen drives in a small anti-static bag or case. A free diagnosis tells you whether the problem is logical or a chip or controller fault.

How to prevent it next time

Flash storage fails without warning. Copy photos and files off cards and pen drives as soon as you can, keep at least two copies, and do not delete from the card in the camera until both copies are checked. Use the safe-eject option, never remove a card while the light is blinking, and format cards in the device that will use them rather than on a computer. For SSDs, keep system and personal files backed up to a second drive or the cloud, and keep your encryption recovery keys safe.

Ask our experts: free diagnosis. Send us a message on WhatsApp and we reply within 30 minutes during working hours (Monday to Saturday, 10:30 to 20:00). Recovery starts from ₹990, physical and complex cases are quoted individually after diagnosis, and if we cannot recover your data, you do not pay.

Chat on WhatsApp  |  Call +91 79046 79817  |  Ask D, free diagnosis

Frequently asked questions

What does chip-off mean in data recovery?

It means reading the memory chips directly, because the controller or board no longer works.

Is chip-off recovery always possible?

No. Damaged chips, strong encryption or very new controllers can make it impossible.

Will chip-off damage my data?

Done properly, no. The chips are read, not written to, and a copy is made.

Can you do it for a dead pen drive?

Yes, we offer chip-level reading for pen drives, cards and SSDs at our Porur lab.

How long does it take?

It is slower than a logical recovery. We give an estimate after the free diagnosis.

Related guides and services

Recovea is a data recovery lab at 2nd Floor, Plot No-4, Thiraviyam Nagar 1st Street, Sai Nagar, Porur, Chennai 600116. We accept drives by pickup or courier from anywhere in India.